Built-in stop panel
When a potentially dangerous process requires synchronous action by both hands to release or maintain the operation of a machine, the Duelco line of 2 Hand Control Stations with E-Stop button will effectively ensure the protection of the operator. The PCB3 Control Station has a smelted-aluminum cover with a protective lid over each push button. The PCB3/SD comes equipped with an e-stop button and two reserved 50-millimeter holes to accept actuator buttons. The PCB3/S includes the two push buttons and the e-stop button, while the PCB3/P adds four additional 22.5-mm reserved holes along with the two push buttons and the e-stop. The bottom base is cast aluminum with a central opening for cable entry. All stations come with a 2-mm-thick rubber seal between the base and cover to protect the terminals against dust, oil and water.
Product information is provided by manufacturers. This publication has not independently tested manufacturers' products and cannot assume responsibility for the validity of product claims.
Post a comment to this article
Safety+Health welcomes comments that promote respectful dialogue. Please stay on topic. Comments that contain personal attacks, profanity or abusive language – or those aggressively promoting products or services – will be removed. We reserve the right to determine which comments violate our comment policy. (Anonymous comments are welcome; merely skip the “name” field in the comment box. An email address is required but will not be included with your comment.)