Lockout/tagout

RSS

Orlando, FL — For the 14th consecutive fiscal year, Fall Protection – General Requirements is OSHA’s most frequently cited standard, the agency and Safety+Health announced during the 2024 NSC Safety Congress & Expo.

Arlington, VA — Spurred by recent deaths and injuries caused by the sudden release of energy from belt conveyor systems, the Mine Safety and Health Administration has issued a safety alert.

Washington — Onshore oil and gas wells need appropriate well planning and control measures in place to “mitigate the potential for the ignition of flammable material,” the Chemical Safety Board says.

Washington — Pointing to OSHA guidance citing “the significant risks associated with inadequate energy control procedures or the failure to properly implement them,” NIOSH is reminding employers that OSHA’s standard on lockout/tagout (1910.147) requires an inspection of written hazardous energy control procedures at least once a year.

Arlington, VA — Spurred by numerous fatalities related to the hazards of working near belt conveyors, the Mine Safety and Health Administration has issued a safety alert.

Washington — OSHA is seeking input on potential updates to its lockout/tagout standard, specifically concerning control circuit type devices and robotics, according to a Request for Information published in the May 20 Federal Register.

Montreal — Canadian scientific research organization IRSST has published a guide that stresses the importance of using lockout/tagout and other methods to control hazardous energy when servicing and maintaining mobile equipment.

The National Fire Protection Agency’s standard for electrical workplace safety, NFPA 70E, is revised every three years. Safety+Health presents an overview of some key elements of the 2018 edition.

Washington – In an effort to ease burdens on employers, OSHA has issued a proposed rule that would “remove or revise outdated, duplicative, unnecessary, and inconsistent requirements” in 18 standards concerning recordkeeping, general industry, maritime and construction.

Members of the National Safety Council Consulting Services Group travel across the country – and the world – to visit worksites and conduct safety audits. They share with Safety+Health seven hazards they frequently spot, and offer advice on preventing them.